Use the “Hibernate” Mode on Your Computer (163/365)

Most of us recognize that powering down the computer after using it can save us some significant money when it comes to our energy bill. A typical desktop computer uses between 75 and 250 watts. On top of that, the monitor sucks down another 15 to 80 watts.

If you were to leave that machine running for 20 hours (say, when you’re done using it in the evening until you get home the next day), you’re going to be using 1.8 to 6.6 kWh of energy, which, depending on your energy rates, can be anywhere from $0.25 to $1 in energy use while your computer sits there and does nothing.

My parents, for example, would often leave their computer sitting unused for days, costing them at least $20 a month on their energy bill.

Why do this? Convenience, mostly. When you want to use your computer, starting it up from scratch can take several minutes, which can be annoying. I often go get a snack or a beverage and use the restroom while I’m waiting for my computer to start.

The value of powering down your computer to save energy and the value of having your computer ready to go at your convenience at any time is a balancing act.

Sleep mode helps with this, of course. Sleep mode can trim your computer’s energy use down to as little as six watts, and you can set it up to start automatically when you’re away from the computer for a while. The drawback here is that whenever a process happens on your computer, such as an incoming Skype call, the sleep mode immediately stops and you’re back to the large energy use.

My solution? When I’m not at the computer, I put it in “hibernate” mode.

Use the "Hibernate" Mode on Your Computer (163/365)

People who use laptops are probably already familiar with “hibernate” mode. What it essentially does is makes a copy of your current session – the programs you’re running, the web pages you have open – and saves it to disk, then shuts down the computer.

When you start the computer again, rather than running through the normal startup mode (which can take several minutes), it just loads up that session that was saved, which takes maybe five or ten seconds.

In some ways, hibernation offers the best of both worlds. It enables a very quick startup (as you would get from leaving your computer on all the time) but also provides the energy (and financial) savings of not having your computer on all the time.

As I noted above, this is a feature commonly available by default on laptops, but most desktops don’t have this option enabled by default. If you’d like to use it on your desktop computer, here are detailed instructions for enabling the “hibernate” option on a Windows 7 desktop computer.

Give “hibernate” mode a try on your computer. If it works as well for you as it does for me, it’ll become yet another way to save money on your energy bill while still having the convenience of a computer quickly at your fingertips.

This post is part of a yearlong series called “365 Ways to Live Cheap (Revisited),” in which I’m revisiting the entries from my book “365 Ways to Live Cheap,” which is available at Amazon and at bookstores everywhere. Images courtesy of Brittany Lynne Photography, the proprietor of which is my “photography intern” for this project.

If you enjoyed reading this, sign up for free updates!

Loading Disqus Comments ...
Loading Facebook Comments ...
  1. Johanna says:

    Can I use the “hibernate” mode on myself until this godawful series is over? How much energy would that save?

  2. lurker carl says:

    “I often go get a snack or a beverage and use the restroom while I’m waiting for my computer to start.”

    You’ll be more likely to reach your weight loss goals if you leave your computer running.

  3. jim says:

    75-250 W is more like peak power. Idle state will be more like 50-100W. Course it varies a lot and newer models can be more efficient.

    Regarless of the details the point is valid that you should use a sleep mode or turn the thing off when not in use.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>